Product Groups
Pipe Support & Pipe Fittings
Rubber Support Inserts
TECHNICAL DATA :
- To Transit pipe load to supports or hangers without crushing insulation
- Dimensionally Accurate – machine Moulded
- With Tongue and Groove Joints to prevent ingress of Air
- Proof against rotting and termite attack
- No distortion or cracking
- Minimise transmission of noise and vibration from pipes to building structure
- Prevent condensation on hangers and supports
- ECO – FRIENDLY It is no longer necessary to cut trees just to support pipes
Material: Hard Rubber – Density : 1400K Kg/cuM, Operating Temp: -20 to 100 C,
Shore hardness at 80+5, Tensile strength after ageing 100 Kg/cm2, Compression settest 30% min
Rubber Lined Split Clamps
- TECHNICAL DATA:
- Welded nut M8/M10 for all sizes
- Electro- galvanized
- M6 sized screws
- Breaking load in traction : 6000 N
- EPDM sound insulation lining
Split Clamps
TECHNICAL DATA:
- Welded nut M8/M10 for all sizes
- Electro- galvanized
- M6 sized screws
- Breaking load in traction : 6000 N
- Safe working load : 2000 N
- Can be used for both horizontal and vertical installations
Fire Fighting Sprinkler Clamps
TECHNICAL DATA:
- Electro – galvanized
- Breaking load in traction : See table below
- Safe working load in traction : see table below
FIRE FIGHTING SPRINKLER CLAMPS
Standard Clevis Hangers
TECHNICAL DATA :
- Carbon Steel
- Electro Galvanized
- Max Temp: 300 c
U-Bolts
TECHNICAL DATA
- Carbon Steel
- Electro Galvanised
- To use as a support, anchor or guide for various types of pipesU – BOLTS
Saddle Clamps
TECHNICAL DATA :
- Carbon Steel
- Electro Galvanised
Resilient & Anti Vibration Hangers
Rigid Resilient Hanger consist of a resilient rubber mount held between two zinc plated steel caps for uniform distribution of load. It has an integral extended rubber sleeve which prevents direct metal to metal contact, thereby minimizing transmission of noise and vibration.
Resilient & Anti Vibration Hangers